View LNA2702L_385502.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Infrared Light Emitting Diodes
LN59, LNA2702L (LN59L)
GaAs Bi-directional Infrared Light Emitting Diodes
LN59
o2.50.2
6.00.2 1.0 Not soldered
Unit : mm
4.00.2 1.80.2
For light source of VCR (VHS System) Features
Two-way directivity Small resin package Long lifetime, high reliability Long lead wire type (LNA2702L) High-power output, high-efficiency : PO = 1.8 mW (min.)
2-R1.250.1
4.00.2 1.0 3.3
15.31.0
2-0.8 max. 2-0.50.1 0.50.1
1 C0.5
2 2.54
Applications
Light source for tape end sensor of VCR and video camera recorder of VHS system Light source for 2-bit photo sensor
1: Anode 2: Cathode
LNA2702L
Not soldered
o2.50.2
6.00.2 4.00.2 3.3 1.0
4.00.2
1.80.2
2-R1.250.1
Absolute Maximum Ratings (Ta = 25C)
Parameter Power dissipation Forward current (DC) Pulse forward current Reverse voltage (DC) Operating ambient temperature Storage temperature
*
Symbol PD IF IFP* VR Topr Tstg
Ratings 75 50 1 3 -25 to +85 - 40 to +100
Unit mW mA A V C
16.6 1.0
2-0.8 max. 2-0.50.1 0.50.1
33.70.5 3.5
2-0.7 max.
2-0.50.1 1 2 2.54 C0.5 1: Anode 2: Cathode
C
f = 100 Hz, Duty cycle = 0.1 %
Electro-Optical Characteristics (Ta = 25C)
Parameter Radiant power Peak emission wavelength Spectral half band width Forward voltage (DC) Reverse current (DC) Capacitance between pins
*
Symbol P O* P VF IR Ct
Conditions IF = 50mA IF = 20mA IF = 20mA IF = 50mA VR = 3V VR = 0V, f = 1MHz
min 1.8
typ 950 50 1.3 35
max
Unit mW nm nm
1.5 10
V A pF
Radiant power PO shows each value of radiant flux P1 and P2 in two directions.
P1
P2
Note) The part numbers in the parenthesis show conventional part number.
1
Infrared Light Emitting Diodes
LN59, LNA2702L
IF -- Ta
60 10 2
IFP -- Duty Cycle
tw = 10s Ta = 25C 80 70
IF -- V F
Ta = 25C
IF (mA)
IFP (A)
50
IF (mA) Forward current
1 10 10 2
10
60 50 40 30 20 10
Allowable forward current
40
Pulse forward current
30
1
20
10 -1
10
0 - 25
0
20
40
60
80
100
10 -2 10 -1
0
0
0.4
0.8
1.2
1.6
Ambient temperature Ta (C )
Duty cycle (%)
Forward voltage VF (V)
PO -- IFP
10 2 (1) tw = 10s f = 100Hz (2) DC Ta = 25C (1) 1.6
VF -- Ta
10 3
PO -- Ta
IF = 20mA
Relative radiant power PO
VF (V)
10
1.2 10mA 1mA
1
(2)
0.8
Relative radiant power PO
120
IF = 50mA
Forward voltage
10 2
10 -1
0.4
10 -2 10 -3
10 -2
10 -1
1
0 - 40
0
40
80
10 - 40
0
40
80
Pulse forward current IFP (A)
Ambienttemperature Ta (C )
Ambient temperature Ta (C )
P -- Ta
1000 IF = 20mA 100
Spectral characteristics
IF = 20mA Ta = 25C 50 40 30 20 60 10 0 40
Directivity characteristics
60 70 80 90 100 110 120
Peak emission wavelength P (nm)
Relative radiant intensity (%)
130 80 60 40 20 140 150 160 170 180 20 40
960
940
Relative radiant intensity (%)
980
80
920
20
60 80
900 - 40
0
40
80
120
0 860
900
940
980
1020 1060 1100
Ambient temperature Ta (C )
Wavelength (nm)
2
Caution for Safety
Gallium arsenide material (GaAs) is used in this product.
DANGER
Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR

▲Up To Search▲

Price & Availability of LNA2702L

	To Download LNA2702L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .